Tags:
create new tag
, view all tags
ALERT! NOTE: This is a DistributionDocument. Please help maintain high quality documentation: This is a wiki, please fix the documentation if you find errors or incomplete content. Put questions and suggestions concerning the documentation of this topic in the comments section below. Use the Support web for problems you are having using TWiki.

Custom User/Group Notations

Your TWiki site may be depending on a web user authentication mechanism provided in your environment. And your users are well accustomed to the user IDs of that environment.

You may have an LDAP server or Active Directory, which defines groups. And your TWiki site may be connected that directory server using LdapNgPlugin.

This topic discusses how to have such custom notations and use them for access control and change notification setting.

Assumption

Here's the basic assumption of this topic.

  • The user and/or group information is stored in a kind of directory system and TWiki can make a query to it using LdapNgPlugin or something else
  • A directory look-up web application is provided and people can look up user and/or group information there

To make the discussion concrete, let's assume the following custom notations.

User notation: USER:user-id

TWiki gets an authenticated user ID in $ENV{REMOTE_USER} from a mechanismm provided by the environment. A user can be represented as USER:user-id in addition to a wikiname. USER:user-id in a topic becomes a hyper link to the directory look-up page of the user.

Group notation: LDAPGROUP:group-name

Groups are defined in LDAP and they are represented as LDAPGROUP:group-name. There is no wikiname corresponding to those groups. LDAPGROUP:group-name in a topic becomes a hyper link to the directory look-up page of the group.

LDAP groups may be used in parallel to group defined by TWiki topics.

How they are used

For access control, the notations are used as follows.

   * Set ALLOWWEBVIEW = LDAPGROUP:team-foo, USER:bar
For change notification (in WebNotify topics), the notatons are used as follows.
   * 'LDAPGROUP:team-foo'
   * 'USER:bar'
This is inconvenient because you need to put quotes for change notification, but you don't need to for access control. But you can configure change notification so that you don't need to put quotes for the notations.

What's needed

To make use of the notations mentioned above for access control and change notification setting, you need to have the following.

  • A custom user mapping manager and set $TWiki::cfg{UserMappingManager} accordingly.
  • A custom plug-in to render those notations to proper hyper links If a string in the notation refers to a non-existent user or group, it needs to be rendered similarly to a missing topic but clicking it must not end up creating a new topic

How to implement a custome user mapping

Custom user mapping 101

If you simply utilize authenticated user IDs provided by the environment and map to wikinames and map wikinames to user IDs, you don't provide custom notations, and you stick to groups defined by TWiki topics, then you don't have to do a lot with your custom mapping manager. Creating a subclass of TWikiUserMapping and implementing the following methods is enough.

  • handlesUser()
    A wikiname can be handed as a login name. In such a case, false needs to be returned.
  • login2cUID()
  • getLoginName()
  • getWikiName()
  • findUserByEmail()
  • getEmails()
  • findUserByWikiName()

You don't have to have a plug-in for user wikinames, but it's nice if you have it. Because under the assumption, user registration in TWiki is not needed, hence many users leave their user topics (Main.FirstLast) not created. Consequently, quite a few users' wikinames remain broken links.

If user wikinames are converted into links to directory look-up web site's entries, you don't see such broken links of user wikinames. In addition, the wikiname of non-existent user is rendered like a broken link, it's even better.

Since TWiki depends on user accounts provided by the environment, TWiki don't and cannot deal with user password. As such, $TWiki::cfg{PasswordManager} is set to 'none'.

Full-fledged user mapping manager

In addition to above, the following have to be done to make a user mapping manager full-fledged and support the notations mentioned above.

handlesUser()

  Recognized as
a login name
Recognized as
a wikiname
USER:user-id must be must be
LDAPGROUP:group-name must not be must be

login2cUID()

Needs to return a proper cUID when USER:user-id is given.

eachGroupMember()

When LDAPGROUP:group-name is handed, the method needs to return the list whose only element is the one handed.

Otherwise, expand the group.

isGroup()

In addition to groups defined by TWiki topics, LDAPGROUP:group-name needs to yield true.

isInGroup()

In addition to groups defined by TWiki topics, LDAPGROUP:group-name needs to be taken care of.

getEmails()

When LDAPGROUP:group-name is handed, the method needs to return the email address corresponding to the LDAP group.

findUserByWikiName()

When USER:user-id is handed, the method needs to return the corresponding cUID.

Related Topics: AdminDocumentationCategory, TWikiAccessControl, MailerContrib



Comments & Questions about this Distribution Document Topic

Please use the Support forum if you have questions about TWiki features. This comment section is about the documentation of this topic.
Edit | Attach | Watch | Print version | History: r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions
Topic revision: r2 - 2014-07-02 - PeterThoeny
 
  • Learn about TWiki  
  • Download TWiki
This site is powered by the TWiki collaboration platform Powered by Perl Hosted by OICcam.com Ideas, requests, problems regarding TWiki? Send feedback. Ask community in the support forum.
Copyright © 1999-2016 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.